PS - Powder Strip - Enviro-Strip - Non-Methylene Chloride Powder Coating Stripper

Enviro-Strip - Non-Methylene Chloride Powder Coating Stripper

E-coat Stripper is a more eco-friendly, non-methylene chloride stripper. This NMP based immersion stripper uses an Alkaline Activator to quickly remove e-coatings and powder coatings. A great substitute when methylene chloride strippers cannot be used or is not desired.

SHIPS DIRECTLY FROM MANUFACTURER [Powder Strip]

Product Description:

Enviro-Strip is specially designed to remove Powder Coating from ferrous and non-ferrous metals and silicon at room temperatures without the dangers of harmful acids. This product is readily biodegradable. It is not for use on Magnesium.

Properties:

• State: Liquid                           
• Appearance: Thin, clear liquid
• Color: Straw
• Flash Point: 109°F
• Boiling Point: 396°F    
• pH: 13
• Label: Flammable

Product Usage:

Enviro-Strip is formulated for an immersion or dip application.

Always use product at room temperature. Stripping times may vary from project-to-project depending on the type and thickness of coating along with other environmental factors. While agitation is not required, it may accelerate stripping (air agitation is not recommended). After stripping, project should be rinsed with water to neutralize chemical.

Product Disposal:

Municipal and state governments often regulate disposal, please dispose of all chemicals within guidelines set forth by these agencies. For more information, contact your local landfill or trash collector and reference the attached MSDS.

Product Safety:

• Always refer to the MSDS for comprehensive first aid and safety information before using any product.

Recommendations:

1.  At times it is necessary to strain excess coating residue from the chemical. This improves the effectiveness of the chemical and lengthens its life expectancy.
2. Room temperature is defined as 50°–85°F;however optimal usage is between 60°and 75°F.Do not heat the stripper as it does not improve performance and only increases the rate of evaporation.
3. While our Enviro-Strip can be used on all types of metal (and silicon), softer metals such as aluminum should not remain in the stripper for excessive amounts of times as this may cause pitting and etching of the surface.
4. Dispose of waste water per local, state and federal regulations.

_________________________________________________________________________________________________________________________________

Mission Statement

With A Client-Oriented Vision That Focuses On Being Our Client’s Biggest Asset, We At Powder Strip Continually Strive To Produce And Improve The World’s Best Powder Coating Removal Products, To Market Them Competitively And To Provide Unsurpassed Customer Service, All While Treating Everyone Honestly, Consistently, And With Integrity And Respect.

It’s Not Just A Statement At Powder Strip, It’s Our Way Of Doing Business; It’s The Right Way To Do Business!